Learning How to Hook up your HD52SB Soundbar » Back to top

SB1 Rear panel Connections
Using the Remote and Soundbar Funtions » Back to top

Using the HD50SB Remote
Program the functions of the Soundbar into your current remote » Back to top

The learning function allows you to program the functions of the Soundbar into your current remote.
Example: If you would like the Number 1 key on the remote to control the power of the Soundbar, you would follow the following steps:

Using the HD50SB ProgrammingHOW TO SET YOUR SOUNDBAR TO FACTORY SETTINGS
To set the Soundbar back to the Factory Settings, press the Learning button on the Soundbar panel and hold it down for 6 seconds until the LED stops flashing.



Connecting the HD52SB to your TV » Back to top

Option 1:

The Popular Analog Connection

Make sure all components are off before starting the connections. Using the supplied stereo audio cable, connect the Soundbar’s Line 1 (analog) input to your TV’s stereo audio output. If your TV has two sets of audio outputs labeled as Fixed and Variable, use the pair labeled Fixed. This will let you turn your TV’s speakers down while the TV still supplies a constant audio signal to the Soundbar. Then, connect your source (Satellite, DVD, etc) using the remaining Optical input.

HD50SB TV Connect Option 1


Option 2:

The One Wire Digital Connection

Make sure all components are off before starting the connections. If your TV has an Optical Out, and all your sources (blu-ray, satellite, game, etc.) are currently connected to the TV using digital cables (such as HDMI, Optical, or Digital Coaxial) then follow the simple guidelines below. You will need an optical cable, not included but available at your local Precision Acoustics dealer.

NOTE: If your DVD player, cable tuner or satellite tuner does not have a coaxial digital output, you can connect its analog audio output to your TV.
The TV will send its audio signal to the soundbar through the analog connection described above.


HD50SB TV Connect Option 2
Using Analog and Digital Inputs » Back to top

HD50SB Digital Inputs

Connecting your source directly to the Soundbar » Back to top

HD52SB - Connecting your source directly to the Soundbar

Connecting the HD52SB to a Subwoofer - OPTIONAL » Back to top

The Soundbar is equipped with a subwoofer output to allow the addition of an optional powered subwoofer. Adding a Precision Acoustics subwoofer will provide thunderous bass and greatly enhance the listening experience. Make sure all components are off before starting the connections. Connect a single RCA cable to the SUB OUT of the Soundbar to the subwoofer/LFE input on the subwoofer. Turn up the volume on the subwoofer.


HD50SB Connect to Subwoofer

Power Connection of the HD52SB » Back to top

Once you have connected the Soundbar to your TV and sources you can then connect it’s power cord. Connect the small, round connector to the back of the Soundbar where DC21V is indicated. Then, insert the plug into an active, unswitched AC outlet. Do not plug this cord into the accessory outlets found on some audio components. You are now ready to turn on the Soundbar, as well as all other components.

NOTE: Reversing the order of connection can cause a small spark. This is normal and harmless but should be avoided.


HD50SB Power Connect

Placement of the HD52SB » Back to top

Placing the sound bar on a flat surface
If your TV is placed on a flat surface such as a TV stand or another piece of furniture, center it as much as possible with the TV screen.
Attach the supplied rubber pads to the bottom of the Soundbar to prevent scratching the furniture.



HD50SB Placement on flat surface



Wall-Mounting the soundbar

If your TV is placed on a flat surface such as a TV stand or another piece of furniture, center it as much as possible with the TV screen.
Attach the supplied rubber pads to the back of the Soundbar to prevent scratching the wall.



HD50SB Placement on wallmount



Connecting your Soundbar via Bluetooth» Back to top

Follow these steps to pair the soundbar to your Bluetooth device, such as your cellular phone:
If your TV is placed on a flat surface such as a TV stand or another piece of furniture, center it as much as possible with the TV screen. Attach the supplied rubber pads to the bottom of the Soundbar to prevent scratching the furniture.



(
A) - Turn on your speaker using the remote or directly on the Soundbar control panel, and then using your remote or the control panel, press the “SRC” button to scroll through the sources until you see a flashing blue light on the front of the Soundbar. This indicates the Bluetooth is enabled. If the LED is not set to blue, the connection will not work.

(
B) - Select “My Soundbar” from the list on your device and let it pair with the Soundbar. Once a successful pairing has been established, the blue light on the front of the Soundbar will stop flashing. Select the music on your device that you want to hear and press play. To ensure smooth operation, be sure that the volume on your device is set to maximum. Using the remote or control panel to adjust the volume on the Soundbar and enjoy!

HD50SB Placement on wallmount

Instructions for Wireless Subwoofer Connection » Back to top

(A) - Turn on your speaker using the remote or directly on the Soundbar control panel, and then using your remote or the control panel, press the “SRC” button to scroll through the sources until you see a flashing blue light on the front of the Soundbar. This indicates the Bluetooth is enabled. If the LED is not set to blue, the connection will not work. (Ensure that the Bluetooth feature of you personal device (smartphone, ipad, ipod, laptop, etc.) is on.)

(
B) - Select “My Soundbar” from the list on your device and let it pair with the Soundbar. Once a successful pairing has been established, the blue light on the front of the Soundbar will stop flashing. Select the music on your device that you want to hear and press play. To ensure smooth operation, be sure that the volume on your device is set to maximum. Using the remote or control panel to adjust the volume on the Soundbar and enjoy!



 

 


Copyright ©2013 Precision Acoustics. All rights reserved. | terms | webmaster